Amana Air Conditioner Troubleshooting

Amana Air Conditioner Troubleshooting. Despite providing reliable cooling, Amana air conditioners may occasionally experience malfunctions. Troubleshoot your system before calling an Amana Air Conditioning technician.

Small problems are usually easy to resolve. If this does not resolve the issue, you may be able to tell the HVAC professional what you have already tried to narrow down the possible causes.

Amana Air Conditioner Troubleshootingamana air conditioner

Your Amana air conditioner works hard to keep you cool, but from time to time it can’t do its job as effectively as you might like. Try these tips we listed below.

The Amana air conditioner won’t cool

If the air filter of your AC system is clogged, your AC will not be able to provide its full cooling capacity. The evaporator coils will begin to frost up if the air filter is clogged with debris.

To remedy this problem you should try cleaning the filter or replace it if a thorough cleaning proves to be problematic. Before replacing the compressor, double-check for other components that are commonly defective such as the overload protector and compressor capacitor.

If the compressor is defective and needs to be replaced, make sure it’s done by a licensed technician.

The air conditioner won’t shut off

If the temperature control thermostat on your air conditioner controls an external auxiliary heat strip, then it’s possible the thermostat is having issues and controlling both cooling and heating simultaneously.

To determine if this is the case, set your air conditioner to “cooling” only. If there is still no change in temperature after setting it to “cooling only”, then this may be an indication that you have a problem with either or both parts of your system.

You should seek out qualified HVAC (Heating, Ventilation, and Air Conditioning) technicians to check your circuitry settings as it’s possible that the main part of your thermostat has failed and will need replacing.

Note: If you are dealing with a thermostat that will also control heat and cool at the same time, then make sure you remove the protective plate surrounding both systems before obtaining any readings.

AC fan not working

A dual shaft fan motor might be defective. The circulation fan motor has two fan blades: one on either side of the motor: One side of the motor sucks the heat out while the other side blows air over an evaporator coil.

If the bearing is a dual shaft fan motor is defective or broken, it’s difficult for that part to maneuver properly and in turn, this could mean an unsatisfactory experience for your condensing unit’s patient.

To determine if a dual shaft fan motor is indeed faulty, try wiggling it by shaking it at both ends using your hands. If you can feel looseness or wobble around its bearings when doing this, then try replacing that part.

Loud or noisy Amana air conditioners

A problem often arises when compressors start to wear down they begin to either be louder than usual or they growl in an unusual way with the sorts of sounds we’ve never heard them make before.

In this case, replacing a compressor is more costly and far more disruptive than changing its pipes. However, there are so many other things that can go wrong inside of your air conditioning system too.

If you’d rather not take on the project yourself, it’s better probably to leave the job up to a licensed professional who will be well versed in not only revolving the machine but also identifying these other problems quickly and efficiently.

If need be so that your family doesn’t have to deal with any of those uncomfortable noises later on down the line when all you need is for the A/C unit in your home or office building to get you through twenty minutes without sweating too much.

AC remote control doesn’t work

First, try replacing the batteries in your remote. If the remote still isn’t working and you can still turn on the air conditioner manually, your remote just needs new batteries.

Bring the remote back online with a fresh set of batteries, or replace it if that doesn’t help. The main control board is also capable of receiving signals from your remote so make sure that its infrared receiver working! If not, replace the main control board.

The Amana air conditioner compressor won’t work

A faulty overload protector may be stopping your compressor from starting. To help ensure that the problem isn’t related to the compressor itself.

Check more commonly defective parts of an air conditioner compressor capacitor, and especially the main airflow switch located on top of the valves. If replacing these parts doesn’t solve the problem.

Related Guides