Amana Dryer Troubleshooting. Amana brand dryers are a type of gas-powered clothes dryer with several varieties and options.
If you own one of these, you may run into common problems that could cause your Amana to stop working for any of a number of reasons.
Chances are when this happens, you can narrow down the problem or fix it yourself if you keep an eye out for the specific issue that’s preventing your clothes dryer from functioning properly.
Fortunately, there are many quick troubleshooting tips to help your machine get back on its feet quickly so be sure to check out what they’re saying at AmanaAppliancesHelpDesk.info before heading over there to try and figure it all out now.
Amana Dryer Troubleshooting
Here we discuss some ways to troubleshoot Amana dryer problems.
Amana Dryer Will Not Stop
The heating element in your clothes dryer warms the air before directing it into the dryer drum. Sometimes the heating elements burn out over time.
If the heating element is not working, place a multimeter ohm-meter on it to see if there is continuity. If you’re experiencing issues and continuity does not occur, replace the heating element.
A cycling thermostat helps regulate the temperature in your home’s ductwork. There are two types of cycling thermostats, bi-metal and solid-state, each producing different results. If a bi-metal swinging arm is defective, it can cause the dryer to overheat and may lead to a fire.
However, this is rarely the case. Before replacing a bi-metal swinging arm, test all more commonly defective parts. If everything else is working properly, measure continuity on the thermostat. If none exists replace it with a new one.
Amana Dryer Will Not Spin
The dryness control board is responsible for managing the heat and moisture inside your clothes dryer so as to not dried-out or overheat your laundry.
If this part fails, it may cause the cycle to stop before all clothing is adequately dried. Before replacing your control board, check the thermal fuse first.
If this fuse has been tripped, you will need to replace the dryer’s heating element before turning on the unit again. If both of these parts are in good condition, then you must replace the control board.
It’s important to make sure that all parts of your washing machine are working well together. Sometimes one small defect can result in a chain reaction simply because our machines are designed to function with multiple parts being used in conjunction with each other both mechanically and electrically.
The drum bearing support sits at the back of most dryers and takes the weight of the interior drum. The metal support rod can wear out over time, resulting in noisy operation and even a refusal to spin sometimes.
If your dryer won’t turn or makes grinding sounds when it drying clothes, check to see if this part might be behind the problem by removing the belt Once you verify that it’s indeed this part causing your issues, replace it as soon as possible so you get your old dryer back.
Amana Dryer Will Not Start
The door switch is what makes the dryer door click when you close it. On most models, it will click when the door closes.
To determine if the door switch is working, try starting up your dryer and listen for this clicking sound. If you hear a click, you’re in the clear; there’s no problem with your door switch.
But if you don’t hear any clicking, use a multimeter measure for continuity on the door switch. It should have continuity; if it doesn’t then replace it.
The drive motor turns both the drum and the blower wheel to exhaust the air. Two symptoms of a broken drum drive belt include humming noises when the dryer turns on, or the drum will not turn at all.
If either of these symptoms presents themselves during the use of your dryer, clean out any lint and dirt around the blower wheel before checking for broken belt particles.
If no particles are apparent, attempt to turn your motor by hand to see if it is still firmly attached. If no movement can be made with a firm grip, you may need to replace your motor completely.
Amana Dryer’s Will Not Heat
The flame sensor is used to detect any abnormal heat sources in the dryer. If for some reason, the sensor is not working, this could result in the dryer not heating up.
Before you go and check if it’s a problem with the flame sensor, first make sure that there are no problems with any of the igniter or thermal fuse.
To test if it is a flame sensor problem or not, use a multimeter to test the flare for continuity at room temperature. If your flame sensor does not have continuity at room temperature then you can replace it.
The igniter uses heat to ignite the gas in the burner assembly. Without a working igniter, the gas will not ignite and thus will not heat, preventing any drying from being conducted by the dryer.
If you use a multimeter to test for continuity, it’ll work. And just like that, you know if your igniter has burned out. If it is indeed broken, remove and replace it with a new one.
Related Guides
