Frigidaire water dispenser not working

Frigidaire water dispenser not working. A refrigerator dispenser can be an excellent appliance to have because it gives you quick access to ice and water.

However, when it stops working you may think that there’s no way you could continue using the other functions on your fridge for fear of going without necessary supplies such as water.

Yet as long as you know which quarter to turn, refrigerator problems can be solved all the same but only if you keep calm.

When it comes to dispensers not working, troubleshooting methods can vary from easy fixes like a frozen or kinked line to more complicated issues such as what happens when the ice maker is completely out of commission. We are here to help.

Frigidaire water dispenser not workingfrigidaire water dispenser not working 202

Why is my Frigidaire water dispenser not working? Make sure the water filter is positioned properly simply remove and re-install the water filter to double-check. The water filter may be clogged or overdue for replacement. If water is dispensing slowly or not at all, it’s time to replace your water filter.

Water-tube that has frozen

There is a possibility that the dispenser will not work properly because the tubing may freeze up due to excessive cooling. If your tubing is frozen or obstructed, you can check by unplugging it from the bottom and blowing air through it.

If you sense airflow coming out of the other, then there isn’t an obstruction. In the case that there is any blockage, melt away the ice and push out whatever water you can from the end that’s blocked.

The temperature inside your freezer must be between 0-10 degrees Fahrenheit in order for a consistent and easy-to-use flow of water.

Water pressure is too low

If you have a water pressure lower than approximately 20 psi, then the water inlet valve will never open to allow water into the dispenser.

You must make sure that your home’s water pressure is no less than about 20 psi for the inlet valve to open and let water into the dispenser.

Defective Water inlet valvedefective water inlet valve

As mentioned above, you need to maintain at least 20 psi of pressure to make sure that the water valve opens.

When it has been determined that sufficient pressure is reached, connect a multimeter to track whether or not the water valve is closed or open.

If the water valve does not fully open then you may want to consider replacing it with a newer model if the valve does not work after cleaning the entire system.

Faulty Dispenser switch

A very basic and self-explanatory issue. The dispenser switch sends a stream of power to the unit when turned on. If for some reason, there is no current operating through the switch, then you should replace it with the help of a multimeter.

Emitting no power at all will reduce the performance level of your juicer and may lead to other issues that may become complicated over time if left unchecked.

Dispenser Control Board failure

The dispenser control board is responsible for governing most functions of the dispensing system. When it stops supplying power to all parts of the dispensing system.

There is a higher chance that this particular part has failed and you should replace it rather than replace the entire dispensing system.

It’s more likely that one part has failed if only a single piece of the dispensing machine isn’t working, so test each individual feeder before testing the control board.

Some problems may manifest themselves only when several things in the machine aren’t working together.

The water filter is clogged

A clogged water filter might restrict the flow of water to the dispenser, preventing it from working properly. The water filter should be changed about every six months to maintain a proper water flow and ensure clean, healthy water that can be used for drinking.

If the door switch does not work

Check the door switch if the water dispenser is not operating. The switch stops the dispenser from functioning whenever the refrigerator door is ajar or not properly closed.

Test the door switch using a multimeter to see if it continues to conduct electricity when activated if not, change the switch.

Frigidaire water dispenser not working

Related Guides