How To Get Spray Paint Off Concrete

How To Get Spray Paint Off Concrete. Getting paint stains off of your concrete patio, wall, or driveway is quite a daunting task when you consider that paint sprayers have a great deal of pressure which causes the paint to stick to concrete quickly.

While this can be frustrating, you don’t have to worry if you realize how long the stain has sat there because it doesn’t look like it wants to budge using some elbow grease.

There are different safe and effective methods that you can use to get spray paint off of concrete so let us teach you how them in this comprehensive list below.

How To Get Spray Paint Off Concreteget spray paint off concrete

Soak the area with water. Scrub vigorously with a scrub brush, or use a wire brush if needed. Reapply the water until the paint begins to bubble up.

Thoroughly rinse off the paint and then make sure to apply soap and water solution in order to clean it off completely.

We will discuss other possible ways how to get spray paint off concrete here.

Saturate The Area With A Solution

You need to start by soaking all of the paint stains in the paint remover solution that you have chosen. First and foremost, we recommend Goof Off for most sprays and paints since it’s a tried and true paint remover for most spray paints.

Before saturating the entire stain, make sure you test out your remover on a small patch of concrete first to see how it reacts. If you find that the solution is too abrasive and seems to strip your concrete too quickly, you may want to consider something else available to you.

You can, however, saturate the entire stain with the remover and let it absorb for a few seconds if it is working just fine.

Spray The Area With Hot Water

Then, you will want to go over the stain with a pressure washer, pump sprayer, or any other type of power washer you happen to have access to.

If you do this, you will not only be able to blast away the paint that the solution loosens up, but you will also be able to dilute the paint thinning solution on your concrete and minimize any damages that might occur.

It is important to keep track of how much stain, if any, is being removed as you spray the stain.

In some cases, you will be able to get it on the first try, but if you’re not, repeat these steps a few times until you’re certain that every last bit of paint has disappeared for good.

Brush Or Scrub With A Firm Bristlebrush or scrub with a firm bristle

For those of you who were lucky enough to get all the spray paint off in step 2, this won’t apply to you.

When you start to see some progress and you want to remove the paint entirely, you’ll need to scrub the concrete under running water with a firm bristle brush.

This will take twenty to thirty minutes. Don’t be afraid to work hard. As you scrub away, friction heats up the paint until it starts to liquefy, which indicates it’s working.

Even if there are still spots of paint remaining, stir them up and scrape them out until they’re gone.

Until The Solution Completely Fades, Reapply It

During this step, we repeat each step above so we get a good overall result. You will find most solutions can be reapplied several times as long as they do not cause any damage to what you are working on.

However, if you do notice any sort of wear and tear while continuing to add layers, make sure you stop immediately.

Rinse concrete thoroughly with hot soapy waterrinse concrete thoroughly with hot soapy water

Congratulations! You’ve gotten all the spray paint off, so now it’s time to give the concrete a really thorough cleaning.

This step is crucial, however, because concrete will erode over time if you leave paint thinner, nail polish remover, or any other thinning agent on it. Therefore, you must remove all the paint and thinner remnants from your concrete.

I’d recommend rinsing the pressure washer at least twice with some soapy solution if you still have it. By hand, I’d suggest doing 3-4 rounds of cleaning to be sure you get it all off.

After that, you can enjoy your newly-spotless concrete again.

FAQs

Is it possible to remove spray paint from concrete?

Concrete is porous or absorbent, which means that it can readily absorb spray paint so you’ll need heavy duty supplies and materials when preparing to remove it.

The first technique involves power-washing or pressure cleaning the surface to banish splatters and streaks from exterior concrete surfaces like patios and driveways.

Another method of removing spray paint on concrete that involves using trisodium phosphate should be used when dealing with interior concrete surfaces like those in basements.

Is it possible to remove paint from concrete with vinegar?

In addition to being an inexpensive everyday cleaning product, vinegar is also a natural paint remover and can be used to remove oil stains from driveway surfaces.

Vinegar is also used for a number of other purposes around the home and office, including as a way to remove stains from driveways. Be sure to put some vinegar in your cupboard today, as you will be able to use it both inside and outside the house from now on.

Related Guides