How To Hang A Chair From The Ceiling. Most people associate hammock chairs with relaxing outdoors, but actually, there are many hanging chairs that are suitable for indoor spaces.
The difference about these hanging chairs is that it doesn’t rely on a single point of contact with the ceiling to support all of their weight rather it utilizes multiple points spread over the entire fabric so you can relax without compromising your safety.
Some might even have a special feature by which they are designed to break away in the event of excessive pressure being applied.
However, there’s no point buying one if you aren’t going to mount it properly. To mount the chair properly, you somehow have to have access to the ceiling joists and you need some basic DIY skills and tools.
How To Hang A Chair From The Ceiling
First, locate a 15cm wide ceiling joist in the desired location. Make sure not to damage sprinkler systems or electrical circuits by drilling a hole into the center of your ceiling joist.
A locking carabiner or S-hook should be installed carefully, making sure the wood does not split.
One end of the rope needs to be attached to the chair’s hanging device, while the other end should be attached to an S-hook or carabiner installed into your ceiling joist.
How to hang a chair from the ceiling is discussed here.
Select An Area
You should have a minimum clearance of six feet vertically and three feet behind the chair. Your chair will be able to hang properly without bumping into the ceiling or wall, with 6 to 8 feet of space between the floor and ceiling.
If keeping that much distance seems impractical, you can still achieve adequate swinging room by taking at least 3 feet of space away from the room behind the chair.
Take A Rope
If you want to hang your hammock chair in a classic way, use the rope. The rope is a popular choice, and even though it’s used indoors, it will last a long time.
In addition to adding a beachy aesthetic to the hammock chair, the rope also provides a relaxing feeling. To ensure that enough weight is being held, you should use a rope that can handle at least 200 pounds.
Using Chains
Chains are a secure way to hang your chair. Chains add stability to your chair. Some chairs aren’t as beautiful as others, depending on the style of the chair or the design of your house.
However, you’ll know that chain won’t fray or break easily. Prepare your rope or chain in advance so that you have enough to reach the desired height. It is recommended to have at least 7 feet of rope for most needs, but if in doubt, it is better to have more rope than less.
Identify The Ceiling Joists
You can find the location of the ceiling joist using a stud finder. These tend to be installed 16 or 24 inches from the center, so once you’ve found one, you can easily find more should that initial location not work.
Use a stud finder, then mark both sides of the ceiling joist where your hooks will be placed. A magnet can also be used to find the ceiling joists for easier installation.
If you’re hanging your hammock chair from exposed wooden beams, install your hooks in the center of the beam.
Using A Power Drill
Use an electric drill to drill a pilot hole for the eye screw. The bit should be smaller than the width of the eye screw you intend to use.
You should make an indentation into the wood, which measures roughly 2″ in depth and is placed at your center mark.
You can gauge that you’re in the right spot if you see wood shavings on your drill bit – this shows that it’s permeated solid wood.
Attach The Eye Screw
Drill a pilot hole and insert the eye screw. Ensure these screws are long enough to twist at least 2 to 3 inches into the ceiling joists.
Once the eye screw is inserted, turn it clockwise until it is snugly secured. You should not be able to see any threading on the screw once it’s fully inserted.
The ring of the eye screw should touch the ceiling. A screwdriver can be used to tighten if necessary.
Using S-Hook
S-hooks are ideal for hanging chairs. Link an S-hook to the eye screw. Next, attach your rope to the S-hook.
Tie the rope firmly with a few half hitches around it by wrapping partly around one side of the wire loops at the top of the hook where it meets the main block and then going around the opposite side to tie snugly.
If you are using another type of metal attachment besides an “S”-hook, then you will want to make sure that you use two locking carabiners as well. One on each strand of rope to give extra strength when lifting and moving your chair around.
Hang The Chair
Hang your hammock chair by attaching the rope directly to eye hooks. Loop the other end of the rope through the chair’s attachment and use another secure knot or two to tie it securely.
You can weave the roped that is attached to the eye hook once you’ve already secured your chair to make sure it’s as tight as possible.
Make A Weight Test
Little by little, test the weight. Firmly grasp the hammock chair. Add some weight, like jugs of water or thick volumes of books, if it holds. Try sitting on it yourself next.
Ensure that most of your weight rests firmly on your legs as you squat over the seat. Then, slowly ease into the chair until you are fully supported.
Related Guides
