MTD Leaf Blower Troubleshooting. As leaves start falling from the trees, a lot of people are in search of a quick and easy way to remove them from their lawns before things get out of hand.
Purchasing a leaf blower is one solution that many turn to for this task.
However, when you try using your leaf blower, and it doesn’t seem to be working properly, it can be difficult to troubleshoot the matter so as to remedy the problem quickly.
If incorrectly done, it might compound itself until there’s something more serious causing problems.
Here we list some common reasons why your leaf blower might stop working properly.
MTD Leaf Blower Troubleshooting
To troubleshoot your MTD leaf blower, let’s look at some of its common problems.
MTD Leaf Blower Run Poorly
The fuel filter might be clogged. One reason why a gas edger’s engine may run roughly is if the fuel filter is clogged.
Which can happen after leaving gas in the tank for an extended period of time.
Over time, some of the fuel may evaporate, leaving behind a thick and sticky residue that clogs the filter and restricts oil flow to the engine. When refueling your blower, avoid overfilling its tank.
The spark arrestor is a small screen that prevents sparks of gas from being emitted. Over time, the spark arrestor may become clogged with soot.
If the spark arrestor is clogged, the engine will run roughly. To unclog the spark arrestor: first, take it out and then clean it using a wire brush or replace it altogether if necessary.
MTD Leaf Blower Dies After Starting
The carburetor might be clogged. The carburetor can sometimes become clogged if gasoline is left inside the leaf blower for too long.
Fuel that sits in the machine for a longer period of time will become thick and sticky like syrup, possibly making the carburetor hard to work with or unable to work with at all.
If you’re dealing with a clogged carburetor, it may need to be cleaned out thoroughly or perhaps replaced entirely.
The air filter may be clogged. If the air filter is clogged, the engine will get too much fuel and not enough air. As a result, the engine may stall.
If the air filter is clogged, replace it after cleaning or replacing the air filter; test the ignition by turning off the ignition key and attempting to start the engine again.
MTD Leaf Blower Will Not Start
The recoil starter assembly hooks into the side of your leaf blower. If this part breaks, you won’t be able to start your leaf blower.
To troubleshoot your recoil starter assembly, remove the starter and inspect it if you notice that when you pull the rope on the side of your leaf blower.
You can feel it moving around freely when it should stick in place after pulling back and releasing, unfortunately.
The cam needs to be replaced and your starter should be disassembled and any damaged pieces replaced with a working one.
The rewind spring might be broken. When the starter rope is pulled and released, the rewind spring recoils onto a pulley.
If the rewind spring is broken, the rope won’t be able to recoil onto the chainsaw pulley. As a result, the engine won’t start. If the rewind spring is broken, replace it by replacing either
MTD Leaf Blower Troubleshooting
Related Guides
