Ryobi weed eater won’t start

Ryobi weed eater won’t start. Troubleshooting your Ryobi weed won’t start before taking it to a technician may save you time and repair costs.

The company makes both gas and electric weed eaters, but their function is essentially the same.

By keying on the main functions of your green machine, you can better diagnose potential issues and any problems that come up and determine if a visit to the service center is needed or not, necessarily depending on what it appears to be in need of.

Some minor issues can be handled without technical assistance, but some home repairs could cause even more havoc downstream if not done right, so don’t take chances with that kind of thing in, you know, fix something once, fix it right the first time, and forever.

Ryobi weed eater won’t start

ryobi weed eater won't start

One of the first things to check if your lawnmower won’t start is the spark plug.

In some cases, the spark plug may simply be dirty and need a thorough cleaning.

To clean your spark plug, you should remove it and clean the area around it before replacing it. it back into place. Use an emery cloth or a wire brush to scrape off any deposits.

Replacement of the Spark Plug

Inspect the spark plug to see if there are any signs of wear or damage. If the porcelain insulator is cracked, an electrode is severely worn, or it has heavy carbon buildup at the electrode, replace the spark plug.

To determine if the spark plug is defective, use a spark properly tester. There should be a strong spark between its terminals when the engine is cranking, and this indicates that the spark plug needs to be replaced.

Recoil starter assembly is not working properly

recoil starter assembly is not working properly

The recoil starter assembly is a critical element your carbureted engine needs to start. The recoil assembly includes the pulley and cam.

When you pull the starter rope, it causes the starter pawl, also known as the dog, to engage with the flywheel of your engine and rotate it to start turning.

So we want to remind you that if something seems wrong with your Pulley, they should be replaced.

The carburetor is clogged

The main causes of a clogged carburetor are leaving fuel in the weed eater for too long and storing it improperly, which ruins the quality of the gas.

As time goes on and some of the ingredients evaporate from the gasoline, a thicker and stickier substance builds up in the fuel inside the tank.

This can cause your carburetor to get jammed or stopped up, preventing your engine from starting. * If you have a clogged carburetor, try using an engine flush cleaner to clean out all of the grime.

This should probably solve your problem. However, if it does not work, then you may need to rebuild or replace your entire carburetor system.

Dirty Spark Arrestor

When starting the engine, if there is a lot of smoke coming from under the hood, you may need to clean your spark arrestor more often.

The spark arrestor can become clogged with soot over time. Sometimes, this can be completely blocked and could prevent your engine from starting.

If this happens, remove it and clean it with a wire brush to remove soot buildup or replace it altogether.

 The air filter might be clogged

If the air filter is clogged, the engine will get too much fuel and not enough air. If the air filter is clogged replace it with a new one.

Defective Fuel Filter

defective fuel filter

A clogged fuel filter is most commonly caused by leaving fuel in the spooling machine for a long period of time.

Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance.

This sticky fuel can clog up the spooling machine and prevent the engine from starting.

If old fuel was left in the spooling machine (not necessarily applicable), drain the old fuel from the spooling machine’s tank and replace its gasket set or any other part for wear and tear or damage to it or any of its components.

The rewind spring might be broken

The rewind spring might be broken. When the starter rope is pulled and released, the rewind spring recoils the starter rope onto the spool.

If the rewind spring is broken, it will not be able to recoil onto the casing body, preventing the reel from starting up.

Replace any broken or worn parts immediately. Many of these springs can be replaced individually, but it may take more time and money.

It’s easier to replace an entire assembly because then you’ll have a backup just in case you need it again in the future.

The recoil starter pulley is broken

The starter rope is there to pull out the cord when the recoil starter pulley is engaged. If there’s breakage or malfunctioning due perhaps to rust and age, it cannot perform its intended function.

The starter will not serve as intended, and you’ll have to replace it once you have ascertained that the component isn’t fixable.

Ryobi weed eater won’t start

Related Guide